General Testing and Inspection specification:
Dielectric Strength-Sparkle: 5 kv/0.15sec.
Dielectric Strength-Immerse water: 1 kV/30min. Then increase a rate of 500V/s Until 3kV<0.5mm2; 5kV>0.5mm2 Breakdown shall not occur.
Low temperature -winding: -40℃/4hr. to be able to Withstand 1kv/min. or over
Short term ageing:110℃/240hr. after conditioning at room temperature 16hr. perform the winding test. to be able to withstand 1kv/min. or overBreakdown shall not occur.
Shrinkage by heat: 150℃/15min The maximum Shrinkage shall not exceed 2mm.
Incombustibility: The frames shall be naturally extinct within 70 secobds after combustion
Abrasion Resistance:
0.35mm2 100g, to be 250 mm or over
0.50mm2 200g, to be 300 mm or over
0.75mm2 200g, to be 350 mm or over
1.00mm2 200g, to be 400 mm or over
1.50mm2 200g, to be 450 mm or over
2.00mm2 200g, to be 500 mm or over
2.50mm2 500g, to be 250 mm or over
3.00mm2 500g, to be 300 mm or over
5.00mm2 500g, to be 350 mm or over
Dielectric Strength-Sparkle: 5 kv/0.15sec.
Dielectric Strength-Immerse water: 1 kV/30min. Then increase a rate of 500V/s Until 3kV<0.5mm2; 5kV>0.5mm2 Breakdown shall not occur.
Low temperature -winding: -40℃/4hr. to be able to Withstand 1kv/min. or over
Short term ageing:110℃/240hr. after conditioning at room temperature 16hr. perform the winding test. to be able to withstand 1kv/min. or overBreakdown shall not occur.
Shrinkage by heat: 150℃/15min The maximum Shrinkage shall not exceed 2mm.
Incombustibility: The frames shall be naturally extinct within 70 secobds after combustion
Abrasion Resistance:
0.35mm2 100g, to be 250 mm or over
0.50mm2 200g, to be 300 mm or over
0.75mm2 200g, to be 350 mm or over
1.00mm2 200g, to be 400 mm or over
1.50mm2 200g, to be 450 mm or over
2.00mm2 200g, to be 500 mm or over
2.50mm2 500g, to be 250 mm or over
3.00mm2 500g, to be 300 mm or over
5.00mm2 500g, to be 350 mm or over
| Cable Type | Nominal Cross Section | Conductor | Conductor | Conductor | Conductor | Insulation | Nominal Outside Diameter | Maximum Outside Diameter |
|---|---|---|---|---|---|---|---|---|
| Cable Type | Nominal Cross Section | No. of Strands | Diameter of Strand | Outer Diameter | Electric Resistance at 20°C | Nominal Wall Thickness | Nominal Outside Diameter | Maximum Outside Diameter |
| HFSS | mm2 | mm | mm | mΩ/m | mm | mm | mm | |
| HFSS | 0.35f | 19 | 0.16 | 0.8 | 54.4 | 0.25 | 1.35 | 1.4 |
| HFSS | 0.5f | 19 | 0.19 | 0.95 | 37.1 | 0.28 | 1.65 | 1.7 |
| HFSS | 1f | 19 | 0.26 | 1.3 | 18.5 | 0.30 | 2.05 | 2.1 |
| HFSS | 0.35f | 19 | 0.16 | 0.8 | 54.4 | 0.25 | 1.35 | 1.4 |
| HFSS | 1.25f | 37 | 0.21 | 1.5 | 14.9 | 0.30 | 2.15 | 2.2 |
| HFSS | 1.5f | 37 | 0.23 | 1.6 | 12.7 | 0.30 | 2.35 | 2.4 |
| HFSS | 2f | 37 | 0.26 | 1.85 | 9.42 | 0.35 | 2.75 | 2.8 |
| HFSS | 3.00 | 37 | 0.32 | 2.25 | 6.15 | 0.40 | 3.35 | 3.4 |
| HFSS | 5.00 | 58 | 0.32 | 2.8 | 3.94 | 0.40 | 4.15 | 4.2 |
Features
- Application :
- Halogen Free Cable is durable , lightweight, small size, thin wall, environmentally-friendly cable used for both interior and exterior vechicle applications.
- Materials/Standard :
- Conductor : copper wires in compliance with ISO 6722
- Insulation : TPE(TPO) insulated. In compliance with ISO 6722 and RoHS Directive.
- Temperature rate :
- 80°C
Certificate
- Inspection standard ISO 6722
Main Products
Halogen Free Thin-Wall Cable, Halogen Free Ultra Thin-Wall Cable, Thin-wall cable, Cable, Wire
Related Products
Contact Detail
-
Sales ContactMs. Ching Tsai
-
AddressNo. 14-3, Wu Lin St., Shulin Dist., New Taipei City 238, Taiwan.
-
Tel886-2-26835095
-
Fax886-2-26836179
-
E-mail
-
URL