we have kinds of specifications of positve ps plate with different efficiency,for more information,please contact me directly
Specifications
- Model No: KLP-SS
- Application: high resolution printing / CTcP compatible
- Sensitivity: very high
- Resolution: 6 - 8u
- Run length: medium-long
- Coating: blue
- Run length is always dependent on exposure, processing and press conditions
- Properties:
- 1) High sensitivity (KLP-S and KLP-SS)
- High photosensitive material reduces exposure time and increases the efficiency of plate-making procedure
- 2) High resolution (KLP-A and KLP-SS)
- Special ingredients, together with the optimally distributed formula weight of binding polymers, in the coating of KLP-A and KLP-SS offer fine dots with sharp edges and reproduce images with rich tone
- 3) Excellent hydrophilicity
- Multi-grains and Hydrophilic Treatment (PAT Treatment) provide excellent water retaining capability at the non-image area, and thus keep ink-water balance optimally
- 4) Image visibility after exposure
- Color changes after exposure, making it easier to check the image
- 5) Matte surface
- Matte surface helps keep better contact between films and plates
- 6) Available sizes:
- a) Width: 120 - 1,200mm
- b) Length: 210 - 1,600mm
- c) Thickness: 0.14 - 0.30mm
- d) Other sizes available on requests
- Model No: KLP-D
- A.Photosensitive coating
- Our coating is synthesized from imported photo-sensitizer and resin which provides the plate with outstanding run length, high stability, high sensitivity and wide latitude. Specially designed synthesis of photosensitive composition improves the resolution.
- B.Hydrophilic treatment
- Excellent hydrophilic property speeds up the ink-water balance procedure and helps to reduce water consumption during printing process.
- Good water retaining capability prevents non-image areas of the plate from scumming and avoids paper from distortion. Thus, the printing quality improved.
- C.Aluminium substrate
- More than 180 sizes of ps plate available:
- a) Width: 120 - 1,200mm
- b) Length: 210 - 1,600mm
- c) Thickness: 0.14 - 0.30mm
- d) Other sizes available on requests
- D.Anodic-Oxidized layer
- A durable and strong oxidized surface formed after the anodic oxidation treatment on the aluminium substrate. As a result, the printing capacity of the plate is greatly increased. This layer also resists the corrosive effect done by the correction fluid.
- E.Matte Surface
- Tiny airway pellets on the plate�塜 surface shortens the vacuuming time during exposure. It also helps to prevent the image from dot loss.
- F.Multi-Grains
- Multi-Grains improve the hydrophilic property of the non-image areas of the plate. It broadens the ink and water tolerance.
- The finest dots can be reproduced. The run-length of the plate increases because the coating adheres to the grains toughly.
- Storage
- 1.store under dry(relative humidity no more than 65%) and cool(10-30OC) conditions. Keep away from chemicals.
- 2.place at dark room or under yellow light sources when opened.
- 3.shelf life: 18 months
- Exposure
- Effective wave-length: 320-450 mm (blue-ultraviolet light)
- Optimal light source: gallium lodide lamp or ultraviolet light source
- It is recommended to use UGRA PCW82 plate control wedge to fix the optimal exposure time.
- Model No: KLP-A
- Application: commercial color printing
- Sensitivity: high
- Resolution: 8u
- Run length: long120000+
- Coating: green
- Run length is always dependent on exposure, processing and press conditions
- Properties:
- 1) High resolution (KLP-A, KLP-SS):
- Special ingredients, together with the optimally distributed formula weight of binding
- polymers, in the coating of KLP-A and KLP-SS offer fine dots with sharp edges
- and reproduce images with rich tone
- 2) High printing capacity (KLP-A, KLP-S):
- Specially selected resin in the coating of KLP-A and KLP-S significantly increases
- the run length
- 3) Excellent hydrophilicity:
- Multi-grains and Hydrophilic Treatment (PAT Treatment) provide excellent water retaining
- capability at the non-image area, and thus keep ink-water balance optimally
- 4) Excellent IPA resistance:
- Unique coating recipe offers excellent durability and chemical resistance
- 5) Image visibility after exposure:
- Color changes after exposure, making it easier to check the image
- 6) Matte surface:
- Matte surface helps keep better contact between films and plates
- 7) Available sizes:
- a) Width: 120 - 1,200mm
- b) Length: 210 - 1,600mm
- c) Thickness: 0.14 - 0.30mm
- d) Other sizes available on requests
- Model No: KLP-I
- Application: grayscale and color printing
- Sensitivity: low
- Resolution: 10¦�
- Run length: 80,000---100,000
- Coating: green
- Run length is always dependent on exposure, processing and press conditions
- Properties:
- 1) Easy to use:
- Wide latitude and excellent reliability - KLP-I can cope with tough exposure and
- development conditions during manual operation
- 2) Excellent hydrophilicity:
- Multi-grains provide excellent water retaining capability at the non-image area,
- and thus keep ink-water balance optimally
- 3) Matte surface:
- Matte surface helps keep better contact between films and plates
- 4) Available sizes:
- a) Width: 120 - 1,200mm
- b) Length: 210 - 1,600mm
- c) Thickness: 0.14 - 0.30mm
- d) Other sizes available on requests
Main Products
ps/ctp plate and press room chemicals