MFLD Electromagnetic Flowmeter is operating based on principle of the electromagnetic induction law of Faraday, and the sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive liquid and slurry in a close tube, such as the acid, alkali, salt and other fluid which is high corrosive. This item is widely used in oil, chemical, power supply, textile, food, paper making, environmental protection, water conservancy construction, etc.
Main technology parameter
1. Accuracy: 0.5/1.0
2. Protection grade: IP65
3.: Measurement ratio: 1:20
4. Maximum flow rate: 0.3~10m/s
5. Caliber: 10/15/20/25/32/40/50/65/80/100/125/150/200/250/300/350/400/500/600/700/800/900/1000(mm)
6. Signal output: pulse: 0~2kHz, span: 0~5V
7. Analog signal: 0~10mADC, load resistor ≤ 1.5KΩ
4~20mADC, load resistor ≤ 75KΩ
8. Voltage: 220VAC+10%, 50MHz
9. power consumption: ≤ 15VA
Main technology parameter
1. Accuracy: 0.5/1.0
2. Protection grade: IP65
3.: Measurement ratio: 1:20
4. Maximum flow rate: 0.3~10m/s
5. Caliber: 10/15/20/25/32/40/50/65/80/100/125/150/200/250/300/350/400/500/600/700/800/900/1000(mm)
6. Signal output: pulse: 0~2kHz, span: 0~5V
7. Analog signal: 0~10mADC, load resistor ≤ 1.5KΩ
4~20mADC, load resistor ≤ 75KΩ
8. Voltage: 220VAC+10%, 50MHz
9. power consumption: ≤ 15VA
Certificate
- ISO9001:2000 QMS
Main Products
flowmeter,level meter,pressure transmitter,temperature transmitter