YL-1161 High And Low Temperature Tensile Tester
Detailed Product Description
High And Low Temperature Tensile Tester designed to fit with the environmental chamber for tension,compression and shearing test
High And Low Temperature Tensile Tester
This tester is designed to fit with the environmental chamber for tension, compression, shearing test in low or high temperature. The chamber can be removed from the instrument while material testes proceeding in general temperature.
Specifications:
Max. Load: 500kg
Capacity: 1, 2, 5, 10, 20, 50, 100, 200, 500 kg
With dust cover, protective shell, precision ball screw; increases the useful life and accuracy.
High and low temperature test box can be removed to increase use space and convenience while testing in room temperature.
Hardware safety protection: the upper and lower limitemergency Stop button protection.
Machine Dimension: Approx 100*200*240CM
Power
Adopt Servo Motor Drive
Drive Type: Ball leads screw with timing belt to reduce noise.
Speed Range: 0.5500mm/min available setting freely;
Test Component
Load Cells: Accord with the rulers of ASTM-E4, capacity error within 0.5%, using the bridge circuit sensor output, able to do pulling and stress test.
Software Functions
Operation Mode: Entirely control and test by keyboard and mouse, and also can use the machine shortcuts to adjust grips location.
PlatformWindows Operating System
Colorful interface and multilingual display
Operation Mode: USB interface two way transmission
Operation edge-face can display unlimited test data at the same time
Unit Options: metric and British versatility
Flexible forms, can self-plan data location
Data names can be self-set
Edge-face testing can select data displaygraphical display or display simultaneously
Data Processing: saving, calling, list, comparison, etc.
Graphics mode has the power - elongation, strength - time, stress - strain and so on, can do tensile, compression, bending, peeling and other test
Software Protection: Ultra-stroke, super-capacity protection
Accessories
Attached to a set of B01180°grips
Attach extension pole of grips, heat dissipation device and so on, including personal computer
Studio
Inner SpaceType M: 35*35*40CM
Test Temperature: 0-20-40-60100
Temperature Control: Microcomputer PID automatic calculation, stable error
Temperature Accuracy: ±1
Circulation System: Fan forced circulation system
Heating System: SUS304 Stainless steel thermal heater
Cooling System : Fan cooling, High-efficiency compressor, and new environmentally refrigerant
Timing Device: Leakage of electricity and over-load protector, compressor over protector, super-wet power interrupt protection, temperature limited protection device
Machine Material: SUS#304 Stainless steel
With track connection of tensile tester, easy installation and assembly.
Attach special bracket to fix machine and connect installed track
Power: 220V/380V 50 HZ /60HZ30A
High And Low Temperature Tensile Tester designed to fit with the environmental chamber for tension,compression and shearing test
High And Low Temperature Tensile Tester
This tester is designed to fit with the environmental chamber for tension, compression, shearing test in low or high temperature. The chamber can be removed from the instrument while material testes proceeding in general temperature.
Specifications:
Max. Load: 500kg
Capacity: 1, 2, 5, 10, 20, 50, 100, 200, 500 kg
With dust cover, protective shell, precision ball screw; increases the useful life and accuracy.
High and low temperature test box can be removed to increase use space and convenience while testing in room temperature.
Hardware safety protection: the upper and lower limitemergency Stop button protection.
Machine Dimension: Approx 100*200*240CM
Power
Adopt Servo Motor Drive
Drive Type: Ball leads screw with timing belt to reduce noise.
Speed Range: 0.5500mm/min available setting freely;
Test Component
Load Cells: Accord with the rulers of ASTM-E4, capacity error within 0.5%, using the bridge circuit sensor output, able to do pulling and stress test.
Software Functions
Operation Mode: Entirely control and test by keyboard and mouse, and also can use the machine shortcuts to adjust grips location.
PlatformWindows Operating System
Colorful interface and multilingual display
Operation Mode: USB interface two way transmission
Operation edge-face can display unlimited test data at the same time
Unit Options: metric and British versatility
Flexible forms, can self-plan data location
Data names can be self-set
Edge-face testing can select data displaygraphical display or display simultaneously
Data Processing: saving, calling, list, comparison, etc.
Graphics mode has the power - elongation, strength - time, stress - strain and so on, can do tensile, compression, bending, peeling and other test
Software Protection: Ultra-stroke, super-capacity protection
Accessories
Attached to a set of B01180°grips
Attach extension pole of grips, heat dissipation device and so on, including personal computer
Studio
Inner SpaceType M: 35*35*40CM
Test Temperature: 0-20-40-60100
Temperature Control: Microcomputer PID automatic calculation, stable error
Temperature Accuracy: ±1
Circulation System: Fan forced circulation system
Heating System: SUS304 Stainless steel thermal heater
Cooling System : Fan cooling, High-efficiency compressor, and new environmentally refrigerant
Timing Device: Leakage of electricity and over-load protector, compressor over protector, super-wet power interrupt protection, temperature limited protection device
Machine Material: SUS#304 Stainless steel
With track connection of tensile tester, easy installation and assembly.
Attach special bracket to fix machine and connect installed track
Power: 220V/380V 50 HZ /60HZ30A
Main Products
Simulated Envrionment testers/Universal Material testing machines