Hydraulic Cylinder Manufacturers
Click here for details.
Hydraulic Cylinder Manufacturers
Among all the competitive hydraulic cylinder manufacturers, Ningbo Eternal Machinery Co., Ltd.(E.MC) always surprises its customers with better and higher standard of products. Featured in providing excellent quality hydraulic cylinder, the hydraulic cylinder manufacturer, E.MC, keenly strengthens ties between importers and exporters by its premium hydraulic cylinder products, guiding its R&D engineers to achieve the higher standard for better pneumatic fittings, pneumatic cylinder, pneumatic component and so on.
Also supplying premium solenoid valve, E.MC, as a leading symbol out of other hydraulic cylinder manufacturers, keeps abreast of the state-of-art tech and modern machines for upgrading the function of all its pneumatic cylinders. With this ambition different from other hydraulic cylinder manufacturers, E.MC develops its hydraulic cylinder products with the following categories:
Double acting tie rod cylinders:
These are operated by applying oil pressure to the cylinder in both directions. Due to inherent mechanical problems associated with the spring, single acting cylinders with spring return are not used in applications using larger stroke lengths. They may be either single rod ended or double rod ended type.
Bore sizes: from 25mm to 250mm and strokes up to 3000mm
Cylinder tube: Honed Tubing or barrel material can be selected on the basis of application& working pressure
Piston rod: High strength steel piston rod is precision ground and hard chrome plated and regrinded to ensure anti-corrosion and maximum seal life. Normally the rod material is CK45.
Seasls: Parker or Hallite Non-metallic multi-"V" type supported with machined metal top and bottom adapters and with "O" type pressure ring. Seal material may vary to suit hydraulic fluid
Working pressure: 3000PSI
Test Pressure: working pressurex1.5
Standard Finish-Machinery enamel over a primer coat. Other finishes available depending upon specification. Current finishes carried out are:
(1) Single and Two pack acrylics / Various Electroplating techniques
(2) Hot metal spray (for very corrosive environments)
(3) Special Features: Internal non-rotating devices or guides available.
(4) Packing: Gsteel box
EMC is looking for good distributor now. Welcome to contact us right away by the following information:
E-mail: pneumatic128@emc-machinery.com
SKYPE: dongyingbo12
MSN: dongyingbo2006@hotmail.com
Contact: Sunny Lou
Tel: 86-574-27664609
Fax: 86-574-87702889
Among all the competitive hydraulic cylinder manufacturers, Ningbo Eternal Machinery Co., Ltd.(E.MC) always surprises its customers with better and higher standard of products. Featured in providing excellent quality hydraulic cylinder, the hydraulic cylinder manufacturer, E.MC, keenly strengthens ties between importers and exporters by its premium hydraulic cylinder products, guiding its R&D engineers to achieve the higher standard for better pneumatic fittings, pneumatic cylinder, pneumatic component and so on.
Also supplying premium solenoid valve, E.MC, as a leading symbol out of other hydraulic cylinder manufacturers, keeps abreast of the state-of-art tech and modern machines for upgrading the function of all its pneumatic cylinders. With this ambition different from other hydraulic cylinder manufacturers, E.MC develops its hydraulic cylinder products with the following categories:
Double acting tie rod cylinders:
These are operated by applying oil pressure to the cylinder in both directions. Due to inherent mechanical problems associated with the spring, single acting cylinders with spring return are not used in applications using larger stroke lengths. They may be either single rod ended or double rod ended type.
Bore sizes: from 25mm to 250mm and strokes up to 3000mm
Cylinder tube: Honed Tubing or barrel material can be selected on the basis of application& working pressure
Piston rod: High strength steel piston rod is precision ground and hard chrome plated and regrinded to ensure anti-corrosion and maximum seal life. Normally the rod material is CK45.
Seasls: Parker or Hallite Non-metallic multi-"V" type supported with machined metal top and bottom adapters and with "O" type pressure ring. Seal material may vary to suit hydraulic fluid
Working pressure: 3000PSI
Test Pressure: working pressurex1.5
Standard Finish-Machinery enamel over a primer coat. Other finishes available depending upon specification. Current finishes carried out are:
(1) Single and Two pack acrylics / Various Electroplating techniques
(2) Hot metal spray (for very corrosive environments)
(3) Special Features: Internal non-rotating devices or guides available.
(4) Packing: Gsteel box
EMC is looking for good distributor now. Welcome to contact us right away by the following information:
E-mail: pneumatic128@emc-machinery.com
SKYPE: dongyingbo12
MSN: dongyingbo2006@hotmail.com
Contact: Sunny Lou
Tel: 86-574-27664609
Fax: 86-574-87702889
Certificate
- CE
- TUV
Main Products
Solenoid Valve, Pneumatic Fitting, Pneumatic Cylinder, Pneumatic Cylinders, Pneumatic Component, Hydraulic Cylinder, Hydraulic Cylinder Manufacturers