The activated carbon for the Catalyst carrier
The activated carbon for the Catalyst carrier
The activated carbon on catalyst carrier is produced and refined through carbonization and activation with high quality coconut shells as raw materials by the advanced equipments and high technology the products have developed pore structure , huge specific surface area, strong caring performance for catalyst and high hardness for regeneration. widely used for gas purification, solvent recovery, grease decolorization and refinement.
Specifications
- Physical Standard
- Item/Type SY－1(COCO) SY－11(APRICOT) SY－11(APRICOT)
- Surface rate ㎡/g
- (N2BET) 1300-1400 1000-1200 1300-1400
- The volume of the whole holes ml/g ～1 ～0.9 ～1
- The volume of the middle holes ml/g ～0.2 ～0.2 ～0.2
- The volume of the little holes ml/g ～0.55 ～0.45 ～0.55
- Actuol proportion specific gravity g/ml ～2 ～2 ～2
- Specific heat cal/g.℃ ～0.24 ～0.24 ～0.24
- Temperature for tight a fire ℃ ≥450 ≥450 ≥450
Features
- Technology Paramaters
- Checking item/Type SY－1(COCO) SY－11(APRICOT) SY－11(APRICOT)
- Granule size(mesh) % Jis sieve
- ＞710um≤0.5
- 351～589um≥87
- ＜295um≤1.5 (GB/T6003.1-1997)
- ＞800um≤2
- 400～700um≥87
- ＜355um≤2 (GB/T6003.1-1997)
- ＞800um≤2
- 400～700um≥87
- ＜355um≤2 (GB/T6003.1-1997)
- 560-1250um≥90
- (16-32 mesh)
- ＜560um≤5
- Acetic acid value mg/g ≥530 ≥530 500-530 ≥530 500-530 ≥460
- Average granule size mm 0.44～0.49 0.55～0.60 0.55～0.60
- Benzene Adsorption mg/g ≥450
- Zine aetal value g/100ml ≥7 ≥6
- Strength (GB/T13803.5-1999)≥73 (GB/T13803.5-1999)≥73 (GB/T12496.6-1999)≥92
- Surface Density g/ml 0.38～0.49 0.38～0.49 0.45～0.55
- Moisture % ≤3 ≤3 ≤5
- Ash content % ≤4 ≤4 ≤4
- Ferro ≤0.05
- ＰＨ value 5-7 5-7 5-7
Certificate
- ISO:9000
Main Products
activated carbon for utracopacitors,citbic acid,Water purification