Auto Focus Motor Driver IC

Product ID: PT5130

Send Inquiry

The PT5130 is a single 10-bit DAC with 120mA output current sink capability. It features an internal reference and operates from a single 2.3V to 5.5V supply. The DAC is controlled via a 2-wire (I2C compatible) serial interface that operates at clock rates up to 400KHz.



The PT5130’s unique and proprietary Slope Control Modes allow the user to customize the output transient response thereby overcoming mechanical ringing associated with reduced form factor voice coil motors (VCMs).



The PT5130 incorporates a power-on reset circuit, which ensures that DAC output powers up to 0V and remains there until a valid write takes place. It has a power-down feature that reduces the current consumption of the device to 1μA maximum.



The PT5130 is designed for autofocus, image stabilization, and optical zoom applications in camera phones, digital still cameras, and camcorders.



The PT5130 also has many industrial applications, such as controlling temperature, light, and movement, over the range -40℃ to +85℃ without derating.



The I2C address for the PT5130 is 0 x 18h.

Xshutdown pin about PT5130:

XShutdown pin is active low. (Hard Shutdown mode at VBBXSHUTDIWNBB=0V)

Features
  • 120mA current sink
  • 2-wire (I2C -compatible) 1.8V serial interface
  • 10-bit resolution DAC
  • Integrated current sense resistor
  • Selectable output slope control
  • 2.3V to 5.5V power supply
  • Guaranteed monotonic over all codes
  • Power-down to 0.5μA typical
  • Internal reference
  • Built-in UVLO shutdown circuit
  • Power-down function
  • Power-on reset
  • Available in 2 x 3 array, 0.809mm x 1.367mm x 0.395mm WLCSP-6 packages

Main Products

Adaptive Control IC for Fluorescent Lamp Ballast, USB Audio Controller, Linear Dimming LED Driver with Switch On/off, Automotive Digital Clock IC, OEM GPS Receiver, RF Chip, Auto Focus Motor Driver IC

Contact Detail