Rubber Table & Floor Mat

Product ID: P07

Send Inquiry
Grounding hardware is not included with rolls and must be ordered separately. Continuous runs of static dissipative materials should be grounded at six-foot (1.8m) intervals to ensure proper dissipation rates.
  • RTT: 6.6 x 10^8 Ohms per ANSY EOS/ESD-S4.1 @100 Volts
  • RTG: 6.6 x 10^9 Ohms per ANSI EOS/ESD-S4.1 @100 Volts
  • Charge decay: < 0.02 seconds per EIA-541
  • Thickness: 2.0mm, 3.0mm
  • Width: 60cm, 90cm, 100cm, 120cm
  • Length/Roll: 10m, 20m
  • Color: green, gray, blue, etc
  • Resistance classification: dissipative
  • Material construction: two-layer rubber
  • Surface: glare, non-glare
  • Surface resistance and resistance to ESD ground is less than 10^9 ohms
  • Durable, heat and chemical resistance, non-slip surface, lays flat
  • Application: table, floor, shelf
  • Use as either bench or floor mat
  • Economical, easy to cut
  • Easy to install
  • Easy to clean and maintain
  • Attractive shiny or dull finish

Main Products

ESD Rubber Table Mat, Antistatic Glove/Shoe, ESD protective Tile, Clean Mat, Cleanroom Garments, ESD Packaging such as Shielding Film/Bag, Moisture Vapor Barrier Film/Bag, Tyvek, Conductive Foam, Antistatic Tape, Wrist Strap,