Motor Arm , track control arms - Mercedes Benz

Product ID: W220

Send Inquiry
motor arm
The standard production methods are:
Stamping form sheet-metal or coils, or hot forging from steel or a hardening forging aluminium alloy.
Suspension arms must have low weight, and must have bucking and bending resistance and long life under the impact of lateral, starting and braking forces.
Application reference:
1. Vertical end movement to be 0.05 ~ 0.25 mm when socket is supported on surface "z" with a 280kg. Lord in direction "y".
2. Torque stud nuts to 100 - 125 ft. lbs. At assembly onto the vehicle, continue tightening (do not back off) to align the nut slot with the cotter hole to permit assembly of the cotter pin.
3. Ball stud designed for 23mm arm thickness with a 16.5mm gage diameter at small end of taper.
Specifications
  • W220(S)
    • T.G.Q. No.: 888 235
      • OEM No.: 220 350 04 53, 220 350 01 53
      • I/POS: Rear Axle R/L
      • Vehicle: W220(S) 1999~
    • W220(S)
      • T.G.Q. No.: 888 245
        • OEM No.: 220 350 24 06
        • I/POS: Rear Axle R/L
        • Vehicle: W220(S) 1999~
      • W220(S)
        • T.G.Q. No.: 888 255
          • OEM No.: 220 350 22 06
          • I/POS: Rear Axle R/L
          • Vehicle: W220(S) 1999~
        • W220(S)
          • T.G.Q. No.: 888 265
            • OEM No.: 220 350 26 06
            • I/POS: Rear Axle R/L
            • Vehicle: W220(S) 1999~

Main Products

Control Arm, Forging Part, Rubber Bushing, Engine Mounting, Ball Joint, Ball Stud