Products
  • Products
  • Suppliers
  • Categories

Click here for details.

Air Cooled Chiller (Open Type)

Product ID: AC-0.5RT, AC-1RT, AC-2RT, AC-3RT, AC-5RT, AC-8RT, AC-10RT

Send Inquiry
Features
  • Microprocesser Automated Control System:
    • We make high precision temperature of come true even to 1°C difference that will insure your product quality uniformly.
  • Easy-to-Watch Control Panel:
    • You may look after temperature indicating, temperature control, operating condition, alarming and easy-to operate through a well-seeming panel.
  • Fully Automatic Power Saving Control System:
    • Unique owned special program can start up step by step until to whole functions work stably. Once the set temperature reaches, the chiller will also stop with step by step to save energy.
  • High Efficient Components and Most Safe Protections:
    • Equipped with high efficient compressor imported from Europe America or Japan. Chiller can work perfectly by mean of complete series of elements such as Electronic control instrumentation, high/low pressure protector, Drier/Filter of refrigerant and overload relay.
  • Super High Efficiency Heat Exchanger:
    • Using the latest SUS316 condenser, copper pipe C1220 screw type evaporator.
  • Typical Components
    • Electronic Thermocouple
    • High Pressure Gauge
    • Low Pressure Gauge
    • Dryer/Filter
    • Fluid Level
  • Safety System
    • Overload of Compressor
    • Overload of Pump
    • High/Low Pressure Gauge
    • Signal Lamp
    • Float Switch
    • Buzzer
  • Options
    • Pressure Gauge
    • Three Way Valve
    • Cryostat
    • Heat Exchanger
  • Cooling capacity based on ambient temp. +35°C, Chilled water inlet temp. at +12°C and Outlet temp. at +7°C.
  • Cooling water quantity about 12L/mil per 1200 Btu/Hr. needed.
  • Don't put the heat to be removed over the cooling capacity. i.e. [Heat to be removed x 1.25 = cooling capacity]. To ensure the chiller is used under normal condition.
  • In case of using in 50Hz area, then cooling capacity becomes as (60Hz) x 0.83 = (50Hz).
Model Unit AC-0.5RT AC-1RT AC-2RT AC-3RT AC-5RT AC-8RT AC-10RT
Temp. Range °C +5°C / 30°C +5°C / 30°C +5°C / 30°C +5°C / 30°C +5°C / 30°C +5°C / 30°C +5°C / 30°C
Cooling Capacity But/Hr 6000 12000 24000 36000 58000 90000 120000
Kcal/Hr 1512 3024 6048 9072 14610 23000 30240
Kw 1.8 3.5 7 10.5 17.5 28 35
Power Consumption Kw 1 2.2 3.6 5 7.5 8.2 16
Power Source & Operating Current 1Dia.220V60Hz/A 4 8 16 22 33
3Dia.220V60Hz/A 10 15 19 34 43
3Dia.380V60Hz/A 6 8 12 18 25
Compressor Type 9460T 5512 MT-22 300DH 490DH SM-84 SM-100
Power - kw 0.38 0.75 1.5 2.2 3.8 6 7.5
Fan Type Axial Fan Axial Fan Axial Fan Axial Fan Axial Fan Axial Fan Axial Fan
Power - kw 0.08 0.08 0.14 0.24 0.24 0.24 x 2 0.24 x 2
Pump Type Gear Pump Gear Pump Coaxial Volute Pump Coaxial Volute Pump Coaxial Volute Pump Coaxial Volute Pump Coaxial Volute Pump
Power - kw 0.38 0.38 0.38 0.38 0.38 0.75 0.75
Water Flow - L/min 12 18 36 54 90 145 180
Water Head - M 3 ~ 12 3 ~ 12 3 ~ 12 3 ~ 12 3 ~ 12 3 ~ 12 3 ~ 12
Chilled Water Tank L 20 22 55 70 90 160 200
Condenser Finned Cooler Finned Cooler Finned Cooler Finned Cooler Finned Cooler Finned Cooler Finned Cooler
Evaporator C1220 Screw Type C1220 Screw Type C1220 Screw Type C1220 Screw Type C1220 Screw Type C1220 Screw Type C1220 Screw Type
Refrigerant R-22 R-22 R-22 R-22 R-22 R-22 R-22
Outside Dimensions H (mm) 650 850 1150 1250 1500 1500 1500
W (mm) 385 385 465 465 465 650 650
D (mm) 550 650 750 920 1050 1400 1400
Wheel C 100 100 100 100 100 100 100
Chilling Water Pipe inch 1/2" 1/2" 3/4" 1" 1" 1 1/2" 1 1/2"
Change Water inch 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4"
Drain inch 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4"
Power Soure Wire mm 2.0 x 2C 2.0 x 2C 2.0 x 2C 2.0 x 4C 3.5 x 4C 5.5 x 4C 8.0 x 4C
Weight Kg 70 90 130 180 220 270 320

Main Products

Air Cooled Chiller, Water Cooled Chiller, Plate Heat Exchanger