hand tire nut wrench

Product ID: 1313.1313

Send Inquiry
Operating instructions
Assemble the correspondent socket to the drive anvil at he side of the corner brace, put the socket on the nut need to be disassemble. Set the corner brace to the adjacent nut at the opposite side to the detection of the handle. Use the standard 1 Socket with the necessary size according to the tire nut specification, such as 22, 27, 29, 30, 32, 34, 36, 38, 41 and so on. While a nut is in the very deep position of the tire, the extend shank is needed, which is a accessory of the product. while using it to disassemble a nut, if the nut is becoming flexible, you can change a common wrench tool. While using it to assemble a nut, first use a common wrench tool to fix up the nut, then use our Labor-saving Wrench to fasten it.

Notes
As the transmission ratio is 1:56 and the strength will be enlarged 56 times, please pay attention that the strength you use should no less than 21kg. That will be enough to disassemble a nut, or you will destroy the wrench and the nuts.

FA-58A:
1) Tube size: ¢73*330
2) Weight: 7kg
3) Transmission Ratio: 1:56
4)Maximum safe output torque:3600N.M
5) Inner packing: 1set/plastic box
Package size: 370*370 *210
6) Tire nut specs of: 22, 27, 29, 30, 32, 34, 36, 38, 41 of 1 drive square
Features
.saving energy and labor

Main Products

power products