Multifuctional monitor and logger
PowerLog 6S allows bidirectional current sensing, adopting 0.2 mΩ current sampling resistor with low insertion loss.
1 channel 0-60V voltage measurement. 6 channels cells voltage measurement (can not only measure 1-6S Li/ NiMH/NiCd/ Pb battery individual voltage, but also measure 6 channels 0.05-28V voltage)
4 channels temperature measurement (1 channel internal temperature measurement and 3 channels external temperature measurement)
Propeller RPM measurement, adopting non-contact optical sensing, user settable blade number.
PWM signal measurement: frequency, period, pulse width, duty cycle. Applicable to remote control channel signal, measure, and monitor.
PWM output: manual and auto mode, auto mode is able to break in servos, electronic speed controllers, R/C switches etc.
Motor KV measurement. The 2-wire mode is suitable for the KV measurement of brushless motor; while 3-wire mode is suitable for the KV measurement of both brushed and brushless motors.
Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the interface can be operated smoothly.
It can be set Cells Voltage/Pack Voltage/Timer Over/Current/Power/Capacity/Temperature/RPM/Period and Pulse Alarm. What’s more, the extra alarm output can be linkage controlled by the users.
It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
PowerLog 6S has been 100% calibrated before it enters to the market, at the same time, it supports the calibration by users themselves.
The logging interval can be set by users’ different needs. PowerLog 6S has a 16Mbit flash storage, which can log offline data in 33 hours @2 seconds logging interval.
Support upgrading the hardware program by USB port. Adopting HID protocol, dispense with installing driver from PC, plug and play.
The PowerLog 6S supports the “Logview” software and can display, plot and analyze the data by it. (See detail information about Logview in the following website: http://www.logview.info)
1 channel 0-60V voltage measurement. 6 channels cells voltage measurement (can not only measure 1-6S Li/ NiMH/NiCd/ Pb battery individual voltage, but also measure 6 channels 0.05-28V voltage)
4 channels temperature measurement (1 channel internal temperature measurement and 3 channels external temperature measurement)
Propeller RPM measurement, adopting non-contact optical sensing, user settable blade number.
PWM signal measurement: frequency, period, pulse width, duty cycle. Applicable to remote control channel signal, measure, and monitor.
PWM output: manual and auto mode, auto mode is able to break in servos, electronic speed controllers, R/C switches etc.
Motor KV measurement. The 2-wire mode is suitable for the KV measurement of brushless motor; while 3-wire mode is suitable for the KV measurement of both brushed and brushless motors.
Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the interface can be operated smoothly.
It can be set Cells Voltage/Pack Voltage/Timer Over/Current/Power/Capacity/Temperature/RPM/Period and Pulse Alarm. What’s more, the extra alarm output can be linkage controlled by the users.
It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
PowerLog 6S has been 100% calibrated before it enters to the market, at the same time, it supports the calibration by users themselves.
The logging interval can be set by users’ different needs. PowerLog 6S has a 16Mbit flash storage, which can log offline data in 33 hours @2 seconds logging interval.
Support upgrading the hardware program by USB port. Adopting HID protocol, dispense with installing driver from PC, plug and play.
The PowerLog 6S supports the “Logview” software and can display, plot and analyze the data by it. (See detail information about Logview in the following website: http://www.logview.info)
Main Products
charger.access controller