Products
  • Products
  • Suppliers
  • Categories

plasma spray equipment

Product ID: SX-80

Send Inquiry
SX-80 was product based on the type of PT-A3000& METCO-9M plasma spray equipment. It's assembled by: 1)main power supply 2)the commute box 3)the control machine 4)the feed powder machine 5)the spray gun 6)the heat exchanger
Features
  • main power supply
    • SCR(sicicon controlled rectifier) system,the most power is: 105KW,the low temporary load is: 100%;the most out power is:80KW,even while the electric net wave between 15%,it can work as natural. the current wave range is:1~2%.
  • size:1200mm x 800mm x 900mm;weight: about 1000Kg
    • the commute box
      • It's the center of the whole plasma spray system. The power supply,control machine,heat exchanger and spray gun are all connected together in it, and it was also assembled by high frequency ignition,water circuitry and gas circuitry alarm equipment. The box can be moved freely,the water cable's length is: 5m(normal)
    • the control machine
      • The main control center of the whole plasma spray system. The single- phase is: 220V.1KW;have the sinker flowmeter;can appear the number of the current and voltage. It has 3 work type: manual,automatic and economical
    • the feed powder machine
      • We can offer you a feed power machine with double tubes.
    • The powder size range is: 5-200um;the repeat error during in powder less than 1%.
    • The two tubes can be feed powder at the same time,and the feed powder rate is: 20-150g/min.

Main Products

thermal spray equipment,HVOF,Plasma equipment,Arc Spray.