Features
- Multi-Functional LCD display screen
- With memory of 100 molding conditions, 30 points for input and 30 points for output, The setting and modifying of all the data are made by using sheet keys on the control panel, and displayed on the LCD screen, making the operation more conveniently and efficiently performed.
- In addition, bright LCD display with back-light is easy to read under any circumstances.
- Digital LED indication:
- Clearly indicating the temperature, pressure, speed, timing and position of every function simultaneously with each cycle process to procure clear comparison between preset and actual digits of data: counts, temperatures of barrel, and positions.
- Standard equipment
- Automatic barrel-purging device
- Four stages of injection, three stages of holding pressure
- Detecting the over-shot of injection
- Mechanical, hydraulic, and electrical safety devices
- Self-diagnosis system
- Emergency stop device
- Circuit for robot
- Long nozzle
- Oil temperature alarm
- Mould-rack, Mould-lifting hanger with pulley( over 200SSIIA)
- One set of tool
- Hopper dryer
- Cold start prevention
- Optional equipment
- Accumulator
- Special-use screw
- Auto loader
- Air ejector
- Automatic unscrewing system
- Position transducers for clamping and injection units
- Three stages of back pressure functions
| Item / Model | unit | 80-SS2A | 100-SS2A | 130-SS2A | 160-SS2A | 200-SS2A | 250-SS2A | 300-SS2A | 400-SS2A | 500-SS2A | 600-SS2A | 700-SS2A | 850-SS2A | 1000-SS2A | 1250-SS2A | 1500-SS2A |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Injection unit / screw diameter | mm | 28/32 | 36/40 | 40/45 | 45/50 | 50/55 | 55/60 | 60/65 | 70/75 | 75/80 | 80/85 | 85/90 | 95/100 | 100/105 | 110/120 | 120/135 |
| Injection unit / injection pressure | kg/cm square | 1907/1465 | 2021/1637 | 1934/1528 | 1849/1498 | 1900/1570 | 2063/1733 | 1858/1583 | 1617/1408 | 1553/1365 | 1592/1410 | 1612/1438 | 1371/1238 | 1664/1509 | 1444/1213 | 1560/1232 |
| Injection unit / theoretical shot volume | cm^3 | 96/126 | 183/226 | 264/334 | 365/451 | 530/641 | 712/848 | 848/995 | 1423/1634 | 1634/1859 | 1859/2099 | 2552/2861 | 3188/3532 | 4082/4500 | 5132/6107 | 6786/8588 |
| Injection unit/shot weight of injection (PS) | g | 84/110 | 160/198 | 231/292 | 319/395 | 464/561 | 623/742 | 742/871 | 1246/1430 | 1430/1627 | 1627/1826 | 2233/2504 | 2790/3091 | 3572/3938 | 4491/5344 | 5938/7515 |
| Injection unit / injection rate | cm^3/sec | 42/55 | 73/90 | 95/110 | 112/146 | 150/173 | 178/213 | 220/267 | 275/348 | 365/440 | 440/480 | 524/645 | 560/683 | 650/732 | 780/885 | 860/1140 |
| Injection unit / plasticizing capacity (PS) | kg/hr | 17/29 | 35/48 | 55/68 | 95/120 | 130/155 | 170/185 | 185/208 | 235/254 | 254/270 | 270/300 | 290/310 | 332/357 | 380/450 | 513/561 | 561/623 |
| MOULD CLAMPING UNIT / mould clamping force | tons | 80 | 100 | 130 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 650 | 850 | 1000 | 1250 | 1500 |
| Mould clamping unit / mould opening stroke | mm | 215 | 280 | 320 | 390 | 490 | 540 | 575 | 675 | 745 | 845 | 900 | 1000 | 1100 | 1200 | 1430 |
| Mould clamping unit / distance between tie rods | mm | 314 x 238 | 360 x 320 | 410 x 370 | 440 x 400 | 500 x 500 | 550 x 550 | 576 x 576 | 680 x 680 | 750 x 750 | 850 x 850 | 900 x 900 | 980 x 980 | 1050 x 1050 | 1280 x 1280 | 1400 x 1400 |
| Mould clamping unit / mould height | mm | 80-320 | 100-370 | 120-450 | 150-480 | 180-550 | 200-580 | 200-620 | 250-700 | 300-780 | 320-850 | 360-920 | 400-1150 | 450-1230 | 500-1450 | 500-1550 |
| Mould clamping unit / ejector stroke | mm | 60 | 70 | 90 | 115 | 130 | 145 | 160 | 180 | 220 | 220 | 250 | 250 | 250 | 260 | 280 |
| Mould clamping unit / ejector force | tons | 3.5 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 8 | 8 | 8 | 14 | 14 | 20 | 20 | 36 |
| Electrical equipment / pump driving motor | Hp | 7.5 | 15 | 20 | 25 | 30 | 40 | 40 | 50 | 60 | 60 | 50+30 | 50+50 | 75+50 | 75+75 | 75+75+50 |
| Electrical equipment / heater | KW | 4.3 | 5.3 | 5.8 | 6.4 | 8.4 | 10 | 11.7 | 20.5 | 22.5 | 24.3 | 26 | 32 | 38 | 42.8 | 47 |
| Electrical equipment / temperature zones | zones | 3 | 4 | 4 | 4 | 5 | 5 | 5 | 7 | 7 | 7 | 8 | 8 | 9 | 9 | 10 |
| General / machine weight | kg | 2500 | 3200 | 4200 | 5000 | 7500 | 8600 | 9800 | 18500 | 24500 | 26000 | 29000 | 38000 | 44000 | 52000 | 63000 |
| General / machine dimensions | m | 3.8 x 0.8 x 1.6 | 4.6 x 1.2 x 1.65 | 5.1 x 1.3 x 1.7 | 6 x 1.35 x 1.7 | 6.5 x 1.4 x 1.8 | 6.9 x 1.5 x 1.8 | 7.2 x 1.65 x 1.85 | 8.9 x 1.8 x 2.0 | 9.5 x 2.0 x 2.0 | 9.5 x 2.1 x 2.1 | 11.5 x 2.2 x 2.4 | 12.8 x 2.4 x 2.5 | 14 x 2.5 x 2.6 | 15.4 x 2.7 x 2.8 | 16.8 x 3.0 x 3.2 |
Main Products
plastic injection molded machinery