Achieving the most optimum motor control in a simple way.
Specifications
- Control Char.:
- Carrier frequency: 1-12KHz
- Frequency control range: 0.1~400Hz
- Frequency accuracy: Digital: 0.01% (-10~40 Celsius); Analog: 0.4%(-25~10 Celsius)
- Frequency resolution: 0.01Hz with computer or PLC control, 0.1Hz with keypad control when freq. Above 100Hz
- Frequency setting signal: 0-5V / 0-10V / 4-20mA
- ACCEL / DECEL time: 0.1-3600 Sec. with 2 S curves
- Braking Torque: about 20% (built-in braking transistor)
- V/F pattern: 18 Patterns, one curve programmable
- Protection function:
- Instantaneous overcurrent: Approx. 200% rated current
- Overload: Inverter: 150%/1 minute
- Motor overload: Electronic thermal over load relay
- Overvoltage: 200V series: DC bus exceeds 427V, 400V series: DC bus exceeds 854V
- Undervoltage: 200V series: DC bus drop
Features
- Cost Efficiency
- Low noise
- Keypad mounted potentiometer
- Maximum output frequency up to 400Hz
- IGBT
- Easy programming and operation
- High starting torque & low vibration PWM control, programmable V/F curve
- Full range of diagnostic functions
- Multifunction input
- Multifunction output
- Well-considered safety functions
- Carrier frequency 1~12KHz adjustable
- Various analog signal input and output with bias and gain, reverse input signal possible
- Programmable restart function
- RS232/RS485 communication
- Resonant frequency jump control
| Model number | Horsepower | Rated motor (KW) | Rated current (A) | Rated output (KVA) | Input voltage | Output voltage | Momentary power loss ride through time (Sec.) |
|---|---|---|---|---|---|---|---|
| N2-2P5-M | 1/2HP | 0.4 | 3.1 | 1.2 | 1/3 phase (s) 200~230V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~200~230V (proportional to input voltage) | 1 |
| N2-201-M | 1HP | 0.75 | 4.5 | 1.7 | 1/3 phase (s) 200~230V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~200~230V (proportional to input voltage) | 1 |
| N2-202-M | 2HP | 1.5 | 7.5 | 2.9 | 1/3 phase (s) 200~230V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~200~230V (proportional to input voltage) | 1 |
| N2-203-M | 3HP | 2.2 | 10.5 | 4.0 | 1/3 phase (s) 200~230V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~200~230V (proportional to input voltage) | 1 |
| N2-401-M | 1HP | 0.75 | 2.3 | 1.7 | 3 phase (s) 380~460V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~380~460V (proportional to input voltage) | 1 |
| N2-402-M | 2HP | 1.5 | 3.8 | 2.9 | 3 phase (s) 380~460V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~380~460V (proportional to input voltage) | 1 |
| N2-405-M | 3HP | 2.2 | 5.2 | 4.0 | 3 phase (s) 380~460V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~380~460V (proportional to input voltage) | 1 |
| N2-405-M | 5HP | 3.7 | 8.8 | 6.7 | 3 phase (s) 380~460V +/- 10%, 50/60Hz +/- 5% | 3 phase 0~380~460V (proportional to input voltage) | 1 |
Main Products
inverter (AC drives, frequency converter), contactor, magnetic switches, PLC, motor starter & control switch