Products
  • Products
  • Suppliers
  • Categories
Dry Laminating Machines

Dry Laminating Machines

Click here for details.

Shaftless Type

Product ID: DL-S1000/S1300

Send Inquiry

Dry Laminating Machines (Shaftless of Stand unit)

Description:

  • for Plastic Laminating
  • for flexible Packaging Converting.

 



1

SHAFTLESS TYPE UNWINDER
 1

SHAFTLESS TYPE REWINDER
 1

INSERT TYPE BUSHING

. Employs sleeve type chuck with tapered cone to hold material firmly with

  long stroke feature.

. Material width within 650mm. Can be clamped without the need of

  additional accessories.
 SMOOTHING ROLL   SMOOTHING ROLL

．The smoothing roll is operated by air cylinder.

．An indexing handle provides micrometric adjustment of contact. Contact 

   position is displayed easily.

．Smoothing roll features synchronized motion with pressure roll raising

   and is separated by material.
 CHAMBER DOCTOR SYSTEM   CHAMBER DOCTOR SYSTEM

．No glue splashing during high speed operation.

．Minimum solvent odor.

．Easy to install and clean.

．Minimum variation of liquid viscosity.

．Long service life of doctor blade.
 OPEN DOCTOR BLADE SYSTEM   OPEN DOCTOR BLADE SYSTEM
 DOUBLE-LAYER GLUE TANK   DOUBLE-LAYER GLUE TANK

．The outer layer is equipped with an air suction device for sucking the 

  solvent smell, which avoids odor splashing.
 SLEEVE TYPE COATING IMPRESSION ROLLER   SLEEVE TYPE COATING IMPRESSION ROLLER

．The sleeve type coating impression roller is fast to change to suit various

   material widths.
 INDIVIDUAL MOTOR DRIVE   INDIVIDUAL MOTOR DRIVE

．The coating rubber roller and the glue-coating mesh roller are driven by

   individual motors which avoids uneven coating resulting from slipping

   between the gluing roller and the material.
 3   DRYING MECHANISM

．The drying mechanism has 3 zones with a total length of 8.1 meters.

．The No. 1 zone located at the right employs V shaped nozzles for

   uniform hot air blowing.

．The No. 2 and No. 3 zones are located at the left and employ multi-holes

   board for high efficiency drying.

 

 

Model DL-S1000 DL-S1300
Machine speed 200 M/min
Working speed 180 M/min
Laminating material All kinds of web
Drying system Electric heater (Gas, steam or thermal oli as optional) 1350mm
Drying tunnel length 2.7M x3 sections (8.1M)
Guide roller for drying tunnel Ø90 mm, surface chrome plated. Driven by timing belt.
Coating system Gravure type, individual motor drive
Adhesive pan Stainless steel double-layer type (outer layer can absorb solvent smell)
Laminating roller Mirror-effect treated, hot oil circulation
Max. unwind diameter 600mm
Max. rewind diameter 800mm
I.D. for rewind paper core 75mm (3")
Unwind material fixed method Shaftess (Built-in extended sleeve)
Rewind material fixed method Shaftess (Built-in extended sleeve)
preheating rollow Hot water circulation
Guide roller type Ø120mm., center type, Hard chrome coating
Ladder Swing Type
max. material width 1100mm 1350mm
Coating roller width 1200mm 1400mm
Coating width range 400-1050mm 400-1300mm
Drying blower 3HP x 3 sets 5HP x 3sets
Exhaust blower as optional 10HP 15HP

Main Products

Slitting Machines, Rewinding Machines, Proofing Machine, Dry and Solventless Laminating Machine and Shrink Sleeve Converting Machinery

Contact Detail