Products
  • Products
  • Suppliers
  • Categories

XHR Series

Product ID: XHR 60-10

Send Inquiry
The XHR Series was design and developed in 1993. It was created to primarily address the needs of laboratory environment and general industry request for a 1000 Watt power supply with Power Factor Correction (PFC). Universal AC input lets you use line voltages around the world without adding options or changing switchs. A major achievement was the management of heat during full power with a 90Vac minimum input at a 40 Celsius ambient temperature. No other manufacturer has yet been able to accomplish this goal, given the size and form factor limitations of the mechanical design. Xantrex has contract with the US Marine Corps to supply over 2000 slightly modified XHR 40-25 units which will be delivered during 1996 and 1997.
Models (V-A) XHR 7.5-80 XHR 20-30 XHR 33-18 XHR 40-15 XHR 60-10 XHR 100-6 XHR 150-4 XHR 300-2 XHR 600-1
Output Ratings: N/A N/A N/A N/A N/A N/A N/A N/A N/A
Output Voltage 0-7.5V 0-20V 0-33V 0-40V 0-60V 0-100V 0-150V 0-300V 0-600V
Output Current 0-80A 0-30A 0-18A 0-15A 0-10A 0-6A 0-4A 0-2A 0-1A
Output Power 600W 600W 594W 600W 600W 600W 600W 600W 600W
Line Regulation: N/A N/A N/A N/A N/A N/A N/A N/A N/A
Voltage (0.01% of V max. + 2mV) 2.75mV 4mV 5.3mV 6mV 8mV 12mV 17mV 32mV 62mV
Current (0.01% of I max. + 2mA) 9mA 4mA 2.8mA 2.5mA 2mA 1.6mA 1.4mA 1.2mA 1.1mA
Load Regulation N/A N/A N/A N/A N/A N/A N/A N/A N/A
Voltage (0.01% of V max. + 2mV) 2.75mV 4mV 5.3mV 6mV 8mV 12mV 17mV 32mV 62mV
Current (0.05% of I max. + 2mA) 41mA 16mA 10mA 8.5mA 6mA 4mA 3mA 2mA 1.5mA
Voltage (1% of V max. + 1count ) 0.09V 0.3V 0.43V 0.5V 0.7V 1.1V 1.6V 4V 7V
Meter Accuracy: N/A N/A N/A N/A N/A N/A N/A N/A N/A
Current (1% of I max. + 1count) 0.9A 0.4A 0.19A 0.16A 0.11A 0.07A 0.05A 0.03A 0.02A
Output Noise and Ripple (V): N/A N/A N/A N/A N/A N/A N/A N/A N/A
rms (0-20MHz) 5mV 5mV 7.5mV 5mV 10mV 10mV 20mV 30mV 80mV
p-p (0-20MHz) 50mV 50mV 75mV 75mV 75mV 100mV 150mV 250mV 500mV
Statility: N/A N/A N/A N/A N/A N/A N/A N/A N/A
Voltage (0.05% of V max.) 3.75mV 10mV 16.5mV 20mV 30mV 50mV 75mV 150mV 300mV
Current (0.05% of I max.) 40mA 15mA 9mA 7.5mA 5mA 3mA 2mA 1mA 0.50mA
Temperature Coefficient N/A N/A N/A N/A N/A N/A N/A N/A N/A
Voltage (0.02% of V max./Celsius) 1.5mV 4mV 6.6mV 8mV 12mV 20mV 30mV 60mV 120mV
Current (0.03% of Imax./Celsius) 24mA 9mA 5.4mA 4.5mA 3mA 1.8mA 1.2A 0.6mA 0.3mA
Maximum Remote Sense Line Drop compensation 3V/Line 5V/Line 5V/Line 5V/Line 5V/Line 5V/Line 5V/Line 5V/Line 5V/Line
OVP Adjustment Range (5% to 10% of V max.) 0.375-8.25V 1-22V 1.65-36.3V 2-44V 3-66V 5-11V 7.5-165V 15-330V 30-660V
Specifications
  • Specifications are worranted over a temperature range of 0 - 40 Celsius with default local sensing. From 40 to 70 Celsius, derate 2% per Celsius. Numbers posted are maximum values for model-dependent specifications. Specifications subject ot change without notice.
  • For input voltage variation over the AC input voltage range, with constant rated load.
  • For 0 - 100% load variation, with constant nominal line voltage.
  • Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.
  • Change in output per Celsius change in ambient temperature, with constant line and load.
  • Line drop is subtracted from total voltage available at supply output.
  • AC Input
    • 85-250Vac, 47-63Hz; power factor corrected 7.5A max. @ 100Vac; 6.3A max. @ 120Vac, 3.5A max. @ 220Vac
  • Power Factor
    • 0.98 minimum for full load
  • Input Harmonic Distortion
    • Current harmonics meet IEC1000-3-2 limits
  • Maximum Voltage Differential From Output To Safety Ground: 600Vdc
  • Additional Characteristics
    • Storage temperature range: -40 to +85 Celsius
  • Time Delay Form Power On Until Output Stable: 3 seconds maximum
  • Voltage Mode Transient Response Time:
    • 1ms for the output voltage to recover within 0.1% of its previous level after a step change in load current of up to 50% of rated output.
  • Switching frequency:
    • Nominal 125kHz (250kHz output ripple)
  • Typical Efficiency: > 80%
  • Remote Start/Stop And Interlock
    • TTL compatible input, selectable logic.
  • Remote Analog Programming (full scale input)
    • Voltage: 0-5k, 0-10k.resistance; 0-5V, 0-10V source
    • Current: 0-5k, 0-10k.resistance; 0-5V, 0-10V source
  • Remote Monitoring
    • 0 to full scale output, 1% accuracy
    • Voltage: 0-5V, 0-10V monitor
    • Current: 0-5V, 0-10V monitor
  • AC Input Connector Type
    • IEC 320 15A/250V
  • Front Panel Control
    • 10-turn voltage and current potentiometers
  • Front Panel Voltage Control Resolution
    • 0.02% of V max.
  • Main Output
    • Nickel plated copper bus bars for models up to 40V
    • Wire clamp connector for models over 40V
  • Weight: approx. 8.2kg (18 lbs)
  • Agency Approvals: CSA, CE pending
Features
  • Standard analog programming
  • Form factor (small size and benchtop)
  • Lightweight - easily transportable
  • Wide range of voltage models available
  • Precise adjustment of output provided by 10 turn pots
  • Front panel binding posts
  • Power Factor Correction
  • Over voltage protection (OVP)
  • Internal digital interfaces.
  • 10 turn potentiometer
  • 1/2 rack size
  • Floating outputs
  • Current limit
  • Front panel switch for standby, remote/ local mode
  • Remote/Local switch.
  • Labview software
  • Over temperature protection.
  • Rack mountable
  • Virtual power supply

Main Products

variable output power supplies from 0 - 600V & current range from 0 - 350A