BOPP plain metallized film gift wrap: BOPP metallized film non-heatsealable designed for decorative application. TFI film provides exceptional shiny metallic appearance with low adhesion of aluminum.
| Typical properties | Unit | Test methods | Typical value |
|---|---|---|---|
| Thickness | Micron | Micrometer | 40 |
| Yield | m^2/kg (min.) | N/A | 27 |
| Average thickness variation | % (max.) | ASTM E-252-78 | +/-3 |
| Tensile strength | kg/mm^2 (min.) MD/TD | ASTM D-882-83 | 13/24 |
| Elongation at break | % (max.) MD/TD | ASTM D-882-83 | 170/70 |
| Thermal shrinkage (120 Celsius 15 minutes) | % MD/TD | ASTM D-1204-84 | < 4.0/< 2.0 |
| C.O.F. | Film/film | ASTM D-1894 | 0.5-0.7 |
| Optical density (OHM/SQ) | (max.) | N/A | 2.2 (2.05) |
| WVTR | g/m^2/24 hr (max.) | ASTM E-96 | 1.8 |
| O(2)TR | cc/m^2/24 hr (max.) | ASTM D-1434 | 220 |
Specifications
- Paper core I.D.: 76mm (3 in.) 152mm (6 in.)
- Roll O.D.: max. 600mm
- Width range: 100mm-1500mm (other width on request)
- Length range: standard 4000m., 6000m.
Features
- Product code: No. OP-123
- Further technical information on request
- Note: test aluminum bonding strength according to J.F. Hanlon, handbook of packaging engineering; section 18, test methods, under "bond or delamination" as a knife cut is made through one layer of substrate. Pressure sensitive tape is rubbed down across the cut. The tape is quickly pulled perpendicular to the surface. Any separation is reported as failure".
Main Products
plastic films